Licensed & Insured · 13+ Years Experience

Serving Northern Virginia +1 (571) 283-5253 PlumberBee on Facebook (opens in a new tab) PlumberBee on Instagram (opens in a new tab)

Plumbing Replacement

Sump Pump Replacement in Northern Virginia

PlumberBee replaces residential sump pumps throughout Northern Virginia. We remove the old pump, install a new one in your existing pit, reconnect the discharge line and run a water test so you know it works before the next storm.

New submersible sump pump in a basement pit with a PVC discharge pipe and check valve

About Sump Pump Replacement

A sump pump sits in a pit at the lowest point of a basement or crawl space and pumps groundwater away from the foundation. When it stops keeping up, replacing it is usually faster and more reliable than repairing an old motor.

When to Replace

Signs You Need a New Sump Pump

  • It runs constantly or cycles on and off

    A pump that never rests, or turns on and off every few seconds, often has a failing switch or a motor that can no longer move enough water.

  • It is loud, rattling or grinding

    New noises usually point to worn bearings or a damaged impeller.

  • It does not turn on when the pit fills

    A stuck float switch or burned-out motor leaves the basement unprotected.

  • Visible rust or corrosion

    Corrosion on the housing or discharge connections is a sign the pump is near the end of its service life.

  • The pump is several years old

    Many sump pumps are replaced within roughly 7 to 10 years, sooner in pits that run often.

  • Water in the basement after rain

    If water collects even though the pump runs, it may be undersized or failing.

Good to Know

Submersible and pedestal pumps

Most Northern Virginia basements use a submersible pump, which sits inside the pit, runs quieter and is protected from debris by a sealed housing.

A pedestal pump keeps the motor above the pit. It can be easier to reach, but it is louder and takes more room.

When you request an estimate, tell us which type you have now and roughly how often it runs. That helps us recommend the right replacement.

The Process

How Sump Pump Replacement Works

A clear, four-step process for replacing your sump pump.

  1. 1

    Tell us what is happening

    Call or send the form with a short description, and a photo of the pit if you have one.

  2. 2

    Confirm the replacement

    We review the pump type, pit size and discharge setup and explain what the new installation will include.

  3. 3

    Remove and install

    We disconnect and remove the old pump, set the new one and reconnect the discharge line.

  4. 4

    Test with water

    We fill the pit to confirm the float switch triggers and the pump clears the water properly.

PlumberBee technician in a navy uniform holding a wrench in front of tank water heaters

Why PlumberBee

Why Choose PlumberBee for Sump Pump Replacement

  • Upfront communication

    You know what the job includes before work begins, and you can reach us directly with questions.

  • Professional installation

    Every replacement is installed, connected and tested by an experienced plumber.

  • Local service

    PlumberBee is a local Northern Virginia company that knows the area’s homes and neighborhoods.

  • Clean, respectful work

    We protect your space, haul away the old equipment and clean up before we leave.

  • Licensed & insured

    PlumberBee is licensed and insured, with 13+ years of plumbing experience.

  • Replacement-focused

    We focus on replacements, so the process is practiced, predictable and efficient.

Service Areas

Sump Pump Replacement in Northern Virginia

PlumberBee provides sump pump replacement for homeowners across Fairfax County, Arlington, Alexandria and Loudoun County.

All PlumberBee service areas

Related Services

Water Heater Replacement

Tank and tankless water heater replacement with delivery, installation, testing and old unit removal.

Hose Bibb Replacement

Replace leaking, stuck or freeze-damaged outdoor faucets with a new hose bibb.

Faucet Replacement

Kitchen and bathroom faucet replacement, including new supply lines and a leak check.

Limited-Time Water Heater Offer

Get 10% Off Water Heater Replacement

Replace an aging or failing water heater with a professionally installed new unit, delivered, tested and with your old tank hauled away. Mention this offer when you request your estimate.

Sump Pump Replacement FAQ

How do I know if my sump pump needs to be replaced?

Common signs include a pump that runs nonstop, short-cycles, makes grinding or rattling noises, fails to start when the pit fills, or shows rust and corrosion. If your pump is several years old and you notice any of these, replacement is usually the safer choice.

Can you replace a sump pump in my existing pit?

In most homes, yes. We install the new pump in the existing pit and reconnect it to the discharge line. If the pit or discharge setup needs changes, we explain that before any work starts.

Does PlumberBee remove the old sump pump?

Yes. Removal of the old pump is part of the replacement.

Which areas do you serve for sump pump replacement?

PlumberBee serves homeowners throughout Northern Virginia, including Fairfax, Alexandria, Arlington, Sterling, Ashburn, Leesburg and nearby communities.

Get Your Estimate

Ready for a New Sump Pump?

Request Your Sump Pump Replacement Estimate

Request your estimate online or call PlumberBee. We will confirm the details and schedule your visit.